Ultra Tile ProClean Easy Clean Tile Protector 1L

Easy Clean Tile Protector is a water-based temporary protection for natural stone & porcelain tiling and paving. It protects surfaces against discolouration & residues when using cement-based pigmented polymerised grouts or pointing systems.

Achieve clean, professional results by pre-emptively applying Easy Clean Tile Protector. Easily removed by washing off post grouting, it is essential when working with modern slurry, brush-in and traditional grouting & pointing mortars which may leave unsightly films or hazing.

Please Note: Do not use in temperatures below 5°C or in damp conditions. Use undiluted, apply before grouting or pointing begins. Always perform a test in an inconspicuous area on-site to check the suitability of the product, prior to use – read these instructions fully before application.

DOWNLOADS

EasyClean Technical Datasheet

Size: 1L Bottle
Colours: Milky White / Dries Clear
Application Temperatures: 5°C to 25°C
Drying Time: 40-60 minutes per coat*
Applications / Coats: 2 coats
Application Method: Roller / Sponge / Brush
Dilution: Undiluted

Coverage: 10-20m² per litre for a typical 2-coat application. This will depend on the texture, structure and porosity of the surface.
Storage: This product must be stored in unopened bottles, in a frost-free environment out of direct sunlight. Avoid frost. Ideal storage temperatures are between 5˚C and 25˚C.
Shelf Life: Under the above storage conditions this product has a shelf life of 12 months from the production date.

Ensure the surface is completely dry before applying the coating.  Avoid applying to the un-grouted joints where possible. Always test this product in an inconspicuous area. It remains the responsibility of the end user to check the suitability of the product.